Ring removal and getting stuck!

[maff2k]

So, I'm about 3 weeks into wearing a spiral clone full time. Initially started on the 45mm ring which initially felt ok with occasional pinching. With this in mind I decided that a smaller ring would be better to went to 40mm. This proved a little uncomfortable so went back to 45mm. Two weeks later I tried 40mm and found it really comfortable so moved to that.

Here's the problem: when it came to release I was quite excited and having got the main cage off I could not get the ring off.

Turned quite painful in the end and we had to stop which ruined the mood!

What do others do? I've shifted back to 45mm in the hope I can remove this whilst hard.

[locked4her55]

Next time try some lotion. You might get a bit soft in order to push yourself through but with a little help from a friend you should be rock hard in no time.

Remember, reverse order to putting it on. Shaft first then the balls.

[go where i am told]

Not sure how the spiral works, but I'm in Queens Keep, and we just spin the ring around so the post is on the bottom and out of the way. I don't think I could get out of the ring if I'm excited.

[Michele]

Two options... 1. Be faster so you aren't hard trying to get the base ring off lol or 2. Leave the base ring in place and spin the post down behind your sack so you don't hurt the girly parts. It won't hurt you at all. The base ring acts like a cock ring making you nice and big and hard

[Suebuf]

Lady M, your knowledge continues to impress me and I love the way you put your words together.

[TwistedMister]

For me, a ring small enough to be effective is excrutiatingly painful if left on and erection occurs without the cage in place. Leaving it on is simply *not* an option (I'm a grower, not a shower).

A solid ring must be removed in advance of erection, otherwise I have to take a break and find a way to distract myself until I can get soft enough to remove it. For myself and others like me, a hinged ring may be a better option.

[Linus]

Two options... 1. Be faster so you aren't hard trying to get the base ring off lol or 2. Leave the base ring in place and spin the post down behind your sack so you don't hurt the girly parts. It won't hurt you at all. The base ring acts like a cock ring making you nice and big and hard

I appreciate her observation. The moment my cage is unlocked, my dick erects real hard. So I can never remove my base ring. As she mentioned, I turn the lock post down. So my ring acts as a cock ring which in fact gives both of us great pleasure.
The last I must have removed my base ring must be around 6 months back. I can even shave without removing the ring.

[maff2k]

Thank you all for your replies. I have moved back to the 45mm ring as the 40mm was too tight when I was errect to the point that I was concerned about injury. I can't get the ring off but there's wiggle room so it's not painful.

I turned to ebay and found a hinged ring version of my cage so maybe that's the way forward.

Just the pa to sort now for more lock in!

[locked4her55]

maff2k, You might find that you need something in between the two. Unfortunately that might not be an option with what you are wearing.

For me the 47mm was too big and the 44mm was too small so MM made me something between the two. It did the trick.

[CuriousGeorge51]

I found if I can lube my shaft and push it though the ring then it is not as much a problem getting the rest through and off. The same goes when trying to attach the ring. I get my balls through first, then lube my cock and slide it under and through the ring. With a little pushing and pulling I can usually get it on rather easily even with a moderate hard-on. Hope this helps!