first metal

[Curiousnotgeorge]

deleted

[Sir Chaste]

Curiousnotgeorge: Good luck with your Steelheart order! Let us all know how your new CD fits and your first impressions, after you have received it.

[Atone]

Thanks all. I've ordered the steelheart requesting a slit similar in size to the CB6000s (35mm x 7mm) rather than the hole. I've asked for a 42mm ring which is slightly smaller than my favourite 1 3/4 and indicated the 85mm length. This appears to be slightly smaller than the cb6000s (depending on how the measurement is taken - I've asked him for clarification) which I think should work out well.
CNG

I think 85mm is going to be a bit longer than a CB6000s, possibly by half an inch. I have a Steelheart that was ordered as 80mm overall length and happen to have a 42mm and 44mm ring for it. I don't use it anymore so I would be happy to make any measurements from it if you want. It is 35mm diameter.

Don't underestimate the difference between a 1 3/4" ring and 42mm ring. If you are not positive that you want the 42mm ring you might want to get a 44mm (just slightly less than 1 3/4") also. That way you will have one that you know will work and one that you can move down to when the time is right. It is much cheaper to order the second ring at the time of the original order, it saves a lot of postage and time. I like having two rings, sometimes you need a break from one due to discomfort, changing rings can often make enough difference to keep wearing the device but provide relief.

One final comment. It seems like a big slot. Is the CB6Ks slot really 35mm long?

I am looking forward to seeing it when it is done, it sounds like it will be really nice.

[Curiousnotgeorge]

deleted

[Curiousnotgeorge]

deleted

[Atone]

I've just noticed the Steelworxx comfort ring for 19 EUR. Not quite sure what this is or if I should get it. Anyone have any experience?
CNG

Get it, worth the money. I have had with and without, prefer with. Sent one tube back to have it added, much cheaper from the start.

[Curiousnotgeorge]

deleted

[Atone]

Doesn't affect the gap. Goes at the opening of the tube and creates a smoother transition with less sharp (90 degree) edges.

[hot_toddy_dog]

The comfort ring angles back at the bottom to allow more gap for the testicles, but the gap at the top is the same.

I can't wear the non-comfort 45mm ring even for a day, but the comfort 45mm lets me make it overnight.

Edit: thought you meant the anatomical ring. The comfort ring just makes the tube not bite into your penis and leave marks. Doesn't affect the gap. Get it.

[jack]

Thought I might add this. I like the steelworxx revenge but need to be able to stand and urinate. So I asked them if they could make a CD based on this drawing.

tube1.jpg (133.26 KiB) Viewed 3270 times

Revenge style with custom cage
integraged lock and comfort ring

approx $450 US

Jack