Does anyone know of any good sources for buying parts to make their own stainless steel device?
Specifically 0.080" wall thickness 1/4" ID Stainless steel tubing.
I've found my size rings and post material.
I can weld aluminum at home so stainless should be easy to learn...
DIY part sources
-
DeltaGeorge
- Posts: 55
- Joined: Tue Dec 19, 2017 6:33 pm
- Location: In the closit somewhere in the central time zone
-
Tom Allen
- Site Admin
- Posts: 5662
- Joined: Sat Sep 25, 2010 9:27 pm
- Location: Southern New England, USA
- Last orgasm: April 1st, 2018
- Orgasms this year: 0
Re: DIY part sources
A lot of stuff can be found in the McMaster-Carr catalog:
http://mcmaster.com
The tubing area:
https://www.mcmaster.com/#stainless-ste ... g/=1cnkcfj
Note that both 304 and 316 are generally both fine for body contact, but 316 is considered to be a nicer grade.
http://mcmaster.com
The tubing area:
https://www.mcmaster.com/#stainless-ste ... g/=1cnkcfj
Note that both 304 and 316 are generally both fine for body contact, but 316 is considered to be a nicer grade.
Tom Allen
The Edge of Vanilla
Denial Permanente
The Edge of Vanilla
Denial Permanente
-
DeltaGeorge
- Posts: 55
- Joined: Tue Dec 19, 2017 6:33 pm
- Location: In the closit somewhere in the central time zone
Re: DIY part sources
Thank you,
That's one I haven't checked yet.
That's one I haven't checked yet.