Zero success

[Formyowngood]

Well I've spent up to 400 bucks, and no success. First device was the HT and it was soooo uncomfortable it was unbearable. Lasted almost 24 hours..

Second device, bird locked. First one, right ball falls through the ball trap, and then the ball center tie, that splits the balls, and hold the sleeve down to control erection, broke.... The exchange was fine and now have the new one.... Again with the brand new one, only about an hour into wearing it, right ball slips back into me, and the device eventually comes off....

I sit for a living, I commute on a motorcycle.....
The place I buy the device, they will let you try them on before you buy. The gentleman had made a comment of "man you fill that quite well" he must have serious..

She will be pisst when she finds out this isn't working.. Last straw, MM queens keep.

[Thomas Sub]

Just to make sure, you oiled up in that Holy Trainer, right? I find a little oil makes a big difference.

[Formyowngood]

Going to take a heat gun to the HT tonight and make a few adjustments to it...

[lockedsteve]

I spent more than you before I realized that I spent more on off the shelf devices than a custom made one. I bit the bullet and got a Jailbird from Mature Metal and was extremely pleased with it. I have one ball smaller than the other so it took two inexpensive round trips to MM, the first to increase the gap to 1/2" and then to increase the size of the ring. Now it is perfect and just a part of what I wear every day. MM can make a ring wider on one end than the other or anything you need but you may have to go back and forth initially to get it perfect. However, if you are committed to chastity long term, it is the only way to go in my opinion. You can get a round or oval ring in regular size or two rings soldered together to make it as wise as the CB6000 device. Also can get a security screw instead of a padlock. I had a screw loose, not in my head, but on my Jailbird. I found that a very little LokTite Blue solved that problem as it has for screws I use on things that vibrate.

[Formyowngood]

How long of a wait was it to modify your jail bird? The time thay take to make them seems obsered! She loves the queens keep..

I fixed the problem I was having.. With the birdlock... With just a zip tie... Now it's just right and snugg.... And she's very happy..... I got a smile and a nice kiss, and "that's a good sport"

[Locked by LRC]

...The place I buy the device, they will let you try them on before you buy.

I might be different but, I wouldn't ever by a device from a place like that.

[Formyowngood]

Ehhh very big investment for such...... Each there own..

[knighterrant]

Well I've spent up to 400 bucks, and no success.
She will be pisst when she finds out this isn't working.. Last straw, MM queens keep.

I think it is common to have spent some significant dollars before finding a good fit. I have a CB series that I used before ordering custom, in my case a MCN Contender. Hey, I didn't like dropping the coin either, but I can't see how I would have understood and figured out the fit without the process.

Trying some plastic sizing rings can also be helpful, they fit different than a CB series ring due to difference in width and shape. Trying on a device I would think actually is not a true test drive anyway, since true fit takes days to evaluate not minutes or hours.

If you think you have the right ring size, definitely work with the gap. You may even try a zero gap setup with no spacer. Good luck.