The Steel Worx Cock Cage from Pipedream is what I've got, but oddly enough I can't find it being discussed at all, positive or negative, on any chastity focused sites (Google basically just returns merchant pages).
I haven't experienced any other devices, but this one seems to have a few things going for it:
Much cheaper than other metal devices I've seen ($60-$90 depending on the outlet)
Being metal and with large gaps, trivial to keep clean. Liquids bead and roll right out of it.
Not painful to get an erection in
It's not all perfect though:
It's when losing an erection that the gap edges sometimes rub uncomfortably. Inconsequential initially, but the effect accumulates over time
The top of the ring will sometimes pinch when sitting up from a reclining position
Pipedream Steel Worx
Re: Pipedream Steel Worx
Maybe you'd like to add it to this thread: http://www.chastityforums.com/viewtopic.php?f=3&t=35887
I think to give their device a similar name to other much more renowned makers is deplorable
I think to give their device a similar name to other much more renowned makers is deplorable
poor is the man whose pleasures depend on the permission of another
Re: Pipedream Steel Worx
I've had the same problem finding information on this device also.
Pro:
- Inexpensive
Cons:
- My cock could stick out the end (when cap was unscrewed) when I got erect. So, I could easily have made myself cum or received a good lick job from someone else.
- Poorly constructed. The piece on the tube that attaches to the ring was misaligned when it was welded. A sharp corner of the bracket would cut my shaft when I moved. I had to hammer it flat but it was still not a smooth edge.
- The lower hinge pinched my taint all the time. Even with the device locked the ring doesn't stay completed closed, there is a small amount of play in it and when it closes YYYYOOOWWW!
- The Tube and ring have a tendency of pinching the shaft as the device pivots around the lock where it goes through the device.
I have a fairly high threshold for pain but after a little more than 48 hours I was released. The top of my shaft looks like someone was chewing on it. There were several cuts and I could tell I was bleed from the pinching. Due to health concerns with regard to infection on these areas we've now begun our search for a new device.
As a side note, it was cool pushing the ring as low as it would go and having the wife tease me, then watching my cock head come out of the end of the tube when the cap was taken off. Cool to see my erect penis curved the almost full 90 degrees and sticking out the end.
Pro:
- Inexpensive
Cons:
- My cock could stick out the end (when cap was unscrewed) when I got erect. So, I could easily have made myself cum or received a good lick job from someone else.
- Poorly constructed. The piece on the tube that attaches to the ring was misaligned when it was welded. A sharp corner of the bracket would cut my shaft when I moved. I had to hammer it flat but it was still not a smooth edge.
- The lower hinge pinched my taint all the time. Even with the device locked the ring doesn't stay completed closed, there is a small amount of play in it and when it closes YYYYOOOWWW!
- The Tube and ring have a tendency of pinching the shaft as the device pivots around the lock where it goes through the device.
I have a fairly high threshold for pain but after a little more than 48 hours I was released. The top of my shaft looks like someone was chewing on it. There were several cuts and I could tell I was bleed from the pinching. Due to health concerns with regard to infection on these areas we've now begun our search for a new device.
As a side note, it was cool pushing the ring as low as it would go and having the wife tease me, then watching my cock head come out of the end of the tube when the cap was taken off. Cool to see my erect penis curved the almost full 90 degrees and sticking out the end.
Currently Own: Pipedreams Metalworx