"Hello world" thread

wannapleaser · Post by **wannapleaser** » Mon Sep 02, 2013 7:16 am

If I may present my experience , the last plastic device I had slipped down from its weight , also my newer custom fit MM jailbird does the same thing. I experimented at first with a leather shoe lace and ran the shoelace under the locking post on the JB and around my waste. That would pull the device closer to my body and that made it more comfortable, and more secure. With the cb6000s, I went from 1 post around my waste around my waste to the other. When I decided on the best length, I went to keptforher.com, and told them the length on nylon coated steel cable that is about 1/16inch or about 2mm in total diameter, and they put a loop on each end and crimped the loop with a metal sleeve. Once the steel cable is in place, it cannot be removed unless the device is opened. keptforher.com was very accomadating, and charged me only about $12.00. Thank you for allowing me to give my experience.

Post by **Atone** » Mon Sep 02, 2013 7:56 am

wannapleaser wrote:Once the steel cable is in place, it cannot be removed unless the device is opened. keptforher.com was very accomadating, and charged me only about $12.00. Thank you for allowing me to give my experience.

That is pretty cool, I might have to try that. Thanks for sharing.

locknload · Post by **locknload** » Mon Sep 02, 2013 11:29 am

Master Dark, I suggest having your sub do like I did and get a CB-6000S (S for small, regular CB-6000 if he's bigger when flaccid). These have an assortment of 5 different-sized base rings and various spacers to help figure out sizing and feel. This device has the typical drawbacks of a plastic device (hygiene, splitting) but can be used for a period of time until you are ready to move your boi into a metal device, which for my money is far better in the long term. I got my CB device on Amazon for about half what the other online specialty toy retailers charge, and mine is the genuine thing.

Another inexpensive route is to order a metal device to try out from dhgate.com. They are inexpensive chrome-plated imitations, but will give you a feel for what you would want from a custom metal device, wich will cost 10-20 times more than the Chinese knock-offs.

Post by **MsKinKinkeyHolder** » Mon Sep 02, 2013 11:57 am

Hi, thank you for the advice it was helpfull.Currently using 45mm ring and 2nd shortest spacer.Tried the 40mm ring ,it turned balls blue so didnt think it was wise to continue with it. We are now thinking about trying the Holly trainer. Is anyone currently using one or any advice that might help please ?

Post by **Atone** » Mon Sep 02, 2013 12:23 pm

MsKinKinkeyHolder wrote:Hi, thank you for the advice it was helpfull.Currently using 45mm ring and 2nd shortest spacer.Tried the 40mm ring ,it turned balls blue so didnt think it was wise to continue with it. We are now thinking about trying the Holly trainer. Is anyone currently using one or any advice that might help please ?

I haven't heard too much about the Holy Trainer but it looks to have all the issues the other silicone devices have, you might want to research that a bit.

There is a really big difference between 45mm and 40mm, I would try to find something in between if you think you need smaller.

solo-chastity · Post by **solo-chastity** » Mon Sep 02, 2013 2:48 pm

locknload wrote:This device has the typical drawbacks of a plastic device (hygiene, splitting) ...

I don't understand the commonly repeated concern about hygiene in plastic devices. With my cb6ks, I use the cleaning swabs sold by KeptForHer (http://www.keptforher.com/cleaning.html), and that's worked out quite well. With the large end opening in the CB cages, it's very easy to insert the swab and scrub everywhere, and rinsing is similarly straightforward. Have others had different experiences?

zorgin · Post by **zorgin** » Mon Sep 02, 2013 4:34 pm

hello world! I usually prefer to lurk on a forum for a while, but in the interest of not being a suspected spam bots, I'd like to briefly introduce myself I suppose.

I'm new to the world of chastity, though it's been a dormant fantasy of mine for a while. I'm finding that the bulk of information and discussion put there is for male, rather than female chastity, which I find enormously frustrating, as I am a female with an interest in having someone hold my keys, rather than keeping a male locked up.

Post by **Atone** » Mon Sep 02, 2013 5:34 pm

zorgin wrote: I'm new to the world of chastity, though it's been a dormant fantasy of mine for a while. I'm finding that the bulk of information and discussion put there is for male, rather than female chastity, which I find enormously frustrating, as I am a female with an interest in having someone hold my keys, rather than keeping a male locked up.

Welcome to the forum. I think it is pretty cool that you are interested in female chastity. I would love to hold the keys for a female in chastity, that would be fun. At least until my wife killed me

Post by **MsKinKinkeyHolder** » Tue Sep 03, 2013 11:07 am

Have decided to go for the Holy trainer but getting frustrated over the sizing and measurements.The way the site shows you how to measure and what you end up with dont seem to come together.Can anyone throw any light on measuring and sizing for the HT, compared to the CB ?

Post by **mellykh** » Tue Sep 03, 2013 5:04 pm

I'm a new key holder, looking for advice to help my husband and me as we begin our journey/adventure into chastity. He is currently wearing a CB6000s, and we have already ordered a custom Jailbird to make hygiene easier. Any help or tips would be appreciated.

Thank You
mellykh

Chastity Forums

"Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread

Re: "Hello world" thread