Base ring slippage

[Mistressesboy]

Can someone tell me if this is normal please.

i use a 2" base ring on my cb6000, the same size i have decided on for my MM Queen's Keep. After cleaning the device or showering and putting the ring snug around the back base of my scrotum, within a few hours a portion of my sack has "slipped" out the back of the ring. My balls stay secured but i am not sure if this is normal.

Thanks for any info

Mistressesboy

[poor]

It's normal and also a sign that you should try a smaller ring size. If you can wear the smaller ring, try to amend your QK order as metal is heavier and also grips less than acrylic does.

[Mistressesboy]

Thanks for the info. i had been using a 1 7/8 for a bit and may go back to that as i am getting used to the 2"

[jat100]

any advice for base ring slippage when you cant get the ring any smaller. im using a 42mm ring. It still slips donw on me quite a bit durring the day. but the ring is already so tight i cant keep an erection for a very long time, and sleeping in it is impossible. its a stainless crossfire. my tube without the ring is 110mm and 38mm wide. i cant go any smaller on the tube. maybe a hair shorter but no thinner as i can barly get it on with the sock method. any good advice i would like to be able to be locked in for more than 12 hours at a time thank you in advance