Ordering a steelworxx Chastity Belt

[cookiemonster]

Hello,

I'll attach my question to this thread, instead of creating a new one. It helped me a lot to read through all the pages, but there are still some questions left where you maybe can help me find a satisfying answer.

Like other before, I'm looking forward buying a steelheart and I'm not sure about the measurements. Just some background information for you:

Currently I'm using a CB 6000 with Ring Number 2 (47mm) and the second smallest spacer. Like some wrote before I'm filling the tube nearly every time complete, but it isn't uncomfortable. What I noticed is that some skin swages (hope this is the correct translation) at the end of the tube and before of the space, but from what I read here this seems to be normal.

Now on to the steel heart. Currently I think I would order these dimensions:

A-ring size: 45 (one size smaller than the one I wear on the CB)
tube: 35mm (but I'm thinking more and more if 38mm would be better. When I measure the width I'm mostly between 34/35mm - 36/37mm. The CB 6000 is 35mm wide, isn't it? But I think i read somewhere that it isn't round but oval. My feeling in this tube is quite godd, but I'm fearing, that if I order the tube with 38mm that it would be to wide.
The last point is the total lenght of the steel heart: Here I'm measuring between 95 and 100mm. I took this measurements when I'm relaxed and hold him in my head and attach a measuring tape next to him. Some before wrote that he ordered 90mm and this was to small and he would have better chose 95mm. If I remember correct he used the CB 6000 with the same settings like I do.

At the end a have a last question. If I select this extra for the steel heart http://steelworxx.de/Stainless-steel-ri ... s-43p.html, what does this improve or change? From my point of view this changes the way the cage is attached to the ring, isn't it? But doesn't this eliminate the pin? I hope someone could explain the idea behind this

I'm looking forward for your tips and if you have any questions, please don't hesitate to ask me.

Best wishes

[Atone]

Get the stainless steel ring, it really adds to the comfort. I have had with and without, definitely worth the money. Really expensive to add it later, I know because I did to one tube.

38mm is pretty large in diameter. I don't have a CB6000 but did wear a CB3000 for a while. I would say that the 35mm tube is pretty close in diameter to that.

100mm is really long. If that is what you need then that is what you need but I would be really sure. I have a 35mm x 85mm setup that I find a bit difficult to conceal.

I would recommend two base rings, one the size you think you need based on the CB6000 and one about 2mm smaller than that. It is really expensive (and time consuming) to send the whole device back to get a new ring.

[cookiemonster]

Thanks for your advice

The 100mm are the total length I measured with the method mentioned on his page. I think someone wrote, the CB 6000 has a total length of 105mm. Are your 85mm for the complete device or just the cage? And are you clinching him in or stays everything in normal length?

You just said that the ring adds comfort, but can you explain it in detail how it works?

I don't know yet if I will order a second ring. I'm living in Germany so it takes DHL One day to ship it back, if I need a second ring

Best wishes

Edit: I didn't get the clue of the stainless steel ring. On the picture on the website is the loop pictured which is used for the integrated lock. I always thought that this option would be for that loop but now I found out that it adds a ring to the end of the tube It took me some time, but now I know what this option stands for

[Atone]

The comfort ring works by providing a rounder, wider area where the penis goes in the tube. Without it the edge is fairly narrow with right angle cuts. My first steelheart didn't have it (I forgot to order it) and I never really had any problems. My next one I got it and liked it so I sent the first one back to have it added. That is the tube I wear now. So even though it wasn't a problem without it, it is much better with it. I think it helps with long term wear more so than just a few days at a time.

The 85mm device is the overall length of the whole device including the ring. That device (35mm tube) is like the penthouse suite there is so much room. I much prefer the 32mm x 70mm OAL device. It is comfy and no room for movement most of the time.

I would still order the second ring. I can almost guarantee that you will want it. You will wonder, maybe I should have got a smaller ring. Then you will be able to try it and know.

[bitsy0]

Hello everybody,
I'm back..
but no good news
Do you remember I had problems with the Crossfire, related to stomach-aches? Well, I thought it would be a good idea to stay some time without chastity... Now, time has passed: I'm re-trying the belt (with lots of configurations, cages of 35 and 38, rings of 47,48 and anatomycal), but the problem is EXACTLY the same.
After a while I'm wearing it, my stomach starts roaring, and I can clearly hear some internal noises... like if there were turmoil inside it...

And, here's the worst (scaring) thing:
Now I have this problem even with the other (old) belts! The CB-6000 and the cheap-one I bought on ebay... 5-6 months ago I was using them for 2-3 days NON-STOP (24/24), without problems!
It seems that I have a HEALTH-problem... I don't know, maybe using the old belts for too long (and in the wrong way) caused my organism to react, and now I am allergic to forced chastity!

I don't know what to do
I can't even go to the doctor, and say: Hey doctor, I have stomach aches when I wear the belt, what do you suggest?

Is there a doctor or anyone who studied Medicine at the University, here in the forum?

Thanks..