Hey everyone. We recently locked me back up after being out of the game for a few months. My CB-6000 is splitting again. I've been in for just over a week now. We're interested in trying steel and I ordered a cheap jailhouse model to try it out. Does anyone have experience with these?
My biggest complaint in my CB is after a few days, I get stuck half way in it easily. Makes things difficult with comfort and having to use the bathroom when out and about. I'm hoping this will happen less with a more open steel design.
Thoughts are appreciated.
Trying Cheap Metal soon
-
- Posts: 78
- Joined: Sun Mar 29, 2015 10:13 pm
- Location: North Carolina, USA
Re: Trying Cheap Metal soon
The open design helped us more with the peeing aspect. The getting stuck halfway thing can usually be fixed with the adjust of the scrotum skin, and pulling the penis down a bit through the bars, in a pushing motion. On days it's being super difficult, we rub a tiny amount of coconut oil on the cage and it helps a lot.
As far as the cheap metal devices go, that's all we currently use. We don't want to buy a custome device until we have more experience with the designs. I believe custom will fix some of the issues we have, though.
As far as the metal holding up goes, I think that is just a thing of luck, and sometimes you get decent metal, sometimes you don't.
I don't wear the device myself, as I'm a female, so I can't actually speak on the comfort aspect, but Narcissus says they're mostly comfortable. We had to use a device that is a solid ring instead of a hinged ring though, because the hinged pinch.
As far as the cheap metal devices go, that's all we currently use. We don't want to buy a custome device until we have more experience with the designs. I believe custom will fix some of the issues we have, though.
As far as the metal holding up goes, I think that is just a thing of luck, and sometimes you get decent metal, sometimes you don't.
I don't wear the device myself, as I'm a female, so I can't actually speak on the comfort aspect, but Narcissus says they're mostly comfortable. We had to use a device that is a solid ring instead of a hinged ring though, because the hinged pinch.
- LockedUp24
- Posts: 333
- Joined: Fri Jan 24, 2014 12:52 pm
- Location: Ireland
Re: Trying Cheap Metal soon
Ok I've had the CB6Ks and eventualleventually the pins broke.
We tried a few steel designs some were chrome plated and are not suitable for long term wear.
then we got a cheap Chinese steel device with hinge ringsrings and even though it's comfortable it required a bio safe rubber around the entire ring and thelse rings are not round and I've found that it stretches the skin and over time becomes sore.
Now we bought a new device and this has round solid rings and even though we accidentally got the ring too big it was much more comfortable to wear as the skin was not stretched...yes the solid rings are tricky to get on but these devices are meant for longer term wear and who said the ring has to be removed for any play time.
So a hinged ring has a wider external diameter than a solid ring does.
We tried a few steel designs some were chrome plated and are not suitable for long term wear.
then we got a cheap Chinese steel device with hinge ringsrings and even though it's comfortable it required a bio safe rubber around the entire ring and thelse rings are not round and I've found that it stretches the skin and over time becomes sore.
Now we bought a new device and this has round solid rings and even though we accidentally got the ring too big it was much more comfortable to wear as the skin was not stretched...yes the solid rings are tricky to get on but these devices are meant for longer term wear and who said the ring has to be removed for any play time.
So a hinged ring has a wider external diameter than a solid ring does.
Her Words Her Commands....End of Line.
-
- Posts: 29
- Joined: Tue Sep 24, 2013 3:25 pm
Re: Trying Cheap Metal soon
Thank you for the input. I'm just anxious to try a new device.
She's away for the weekend and keeping me locked while she's away. I think this is my first time being home alone for days and locked. I asked her if she was thinking of keeping me locked until the new one arrives in 2 weeks and she said she might. It's so odd to feel excited and dread it at the same time. 


-
- Posts: 29
- Joined: Tue Sep 24, 2013 3:25 pm
Re: Trying Cheap Metal soon
So my jail house came from China, but there is only one ring. I think it's the middle size one, and is the same size as my preference in my CB, but with the added weight of steel it pulls itself down too much to a point that it's too low on my balls and my cock can slide out. Does anyone have experience with sizing and comfort with this device? I want to try a smaller ring, but I fear I may have to buy a whole new device and hop it comes with 3 in order to.
Thanks
Thanks
Re: Trying Cheap Metal soon
Unfortunately, most sellers of cheap devices don't make it easy to order multiple ring sizes. I can make use of both 40 and 45 mm rings, and have found the 40 can be hard to get and that ordering two rings can mean a lot of things, but never a simple check box for a second ring.
My experience with ring sizes is that experimentation and adjustments will give you varying results.
My experience with ring sizes is that experimentation and adjustments will give you varying results.
-
- Posts: 29
- Joined: Tue Sep 24, 2013 3:25 pm
Re: Trying Cheap Metal soon
I tried wearing it today. It stayed on for the most part, butbit keeps sliding down. From my experience with the CB, I'm willing to bet that it's because the ring is too large. I purchased a new one from Amazon. Same exact jail house device but it said it comes with all 3 rings. Hopefully it actually does and solves my problem. I want to be locked comfortably again.
-
- Posts: 78
- Joined: Sun Mar 29, 2015 10:13 pm
- Location: North Carolina, USA
Re: Trying Cheap Metal soon
Usually you can email sellers for a different sized ring than the standard 45mm or ask them to include a second ring for an additional cost.
When we switched from plastic to metal we went down about 5mm. So the 40mm ring may be exactly what you need.
When we switched from plastic to metal we went down about 5mm. So the 40mm ring may be exactly what you need.
Re: Trying Cheap Metal soon
Unfortunately, you have likely purchased the chromed cheap Chinese Jailbird. It will rust where the rings are welded together.nickishers wrote:I tried wearing it today. It stayed on for the most part, butbit keeps sliding down. From my experience with the CB, I'm willing to bet that it's because the ring is too large. I purchased a new one from Amazon. Same exact jail house device but it said it comes with all 3 rings. Hopefully it actually does and solves my problem. I want to be locked comfortably again.
-
- Posts: 29
- Joined: Tue Sep 24, 2013 3:25 pm
Re: Trying Cheap Metal soon
I'm not too worried about it being cheap, more interested in trying metal. We both think it looks more sexy. However, I'm not sure if its the added weight or the size of the ring that is causing it to slide down. It was just so low to the point that I could easily take my shaft out of it. I need to be sure its secure for her, even though I'm secure to not cheat. But what's the point if I can easily just do it anyway ?
By experience, does a smaller ring on a metal device hold it up better?
By experience, does a smaller ring on a metal device hold it up better?