Lock/Ring Question

For the gearheads in the audience
Post Reply
ChasteCouple82
Posts: 30
Joined: Wed Mar 16, 2022 1:07 pm

Lock/Ring Question

Post by ChasteCouple82 »

What have you done to cover the top of the lock so it doesn’t snag your clothes or hurt your partner when you’re spooned up to them with a lock assembly like the one pictured.

I like the way the hinged rings hide the lock, but the hinge is always uncomfortable. I’d love to find a solid ring that matches the low profile of the hinged ring.
Attachments
F486E5B6-9B64-47CA-9917-ADFEF722561F.jpeg
F486E5B6-9B64-47CA-9917-ADFEF722561F.jpeg (71.79 KiB) Viewed 2604 times
0 x
User avatar
Tom Allen
Site Admin
Posts: 5422
Joined: Sat Sep 25, 2010 9:27 pm
Location: Southern New England, USA
Last orgasm: April 1st, 2018
Orgasms this year: 0
Contact:

Re: Lock/Ring Question

Post by Tom Allen »

I use a dremel to round over the sharp corners on everything.
2 x
Homebody
Posts: 228
Joined: Sun Dec 29, 2019 9:36 am

Re: Lock/Ring Question

Post by Homebody »

I got a roll of white electrical tape and put a piece over the lock. Not the best solution, but it saves the scratches
0 x
User avatar
Tom Allen
Site Admin
Posts: 5422
Joined: Sat Sep 25, 2010 9:27 pm
Location: Southern New England, USA
Last orgasm: April 1st, 2018
Orgasms this year: 0
Contact:

Re: Lock/Ring Question

Post by Tom Allen »

As long as this thread is resurrected, take a look at the brass barrel lock. Those four round circles at the top are where the lock body has been drilled and the springs & pins were inserted. That is what a quality lock looks like. Most of the Chinese locks have a top section that is just a bit of sheet metal stamped onto the body. Using a Dremel, file, etc, to remove the sharp edges will probably dislodge the stamped brass piece, letting all the stuff inside fall out. That's why I recommend getting a real Burg Wachter ME/2.
0 x
User avatar
waki86
Posts: 194
Joined: Sun Apr 03, 2022 7:23 am
Location: Netherlands
Last orgasm: April 5th, 2022
Gender:

Re: Lock/Ring Question

Post by waki86 »

I replaced the lock with a good Burg Wachter lock.
And updated it with a file so that everything is nicely rounded.
0 x
Lock permanently in inverted cage under the kilt :mrgreen:
Post Reply